Trash / Gunoi > How To Use Portforward

You are in:  Forums / Trash / Gunoi / How To Use Portforward
Locked
Deluser
Posted at 2009-04-19 19:58:37 (791 wks ago)
Deleted Account



Posts: 75
Location:


HOW TO USE PORTFORWARD

Before we start there are some things we need to Know.

Static IP why do I need this mines Dynamic.

You can look at this in simple terms, Your IP is like your Zip/Postcode it gives a general location within an area, the Port is like your house Number it gives Exact location.  so if the IP was your house address and that kept changing you would never get your letters.

The reason you need a static IP is that it will not change and the port forwarded ports will always have the right IP address to goto.

Also the rule is one application per port(s) running at the same time so while you could set Bitcomet and Utorrent on the same port they cannot run at the same time.

What does my Router do.

The router acts like a post office it forwards the mail to a general local area post office  for further sorting. rejecting

any mail that does not belong in that area and dropping or forwarding as required .

What do I need to achieve this.

your Ip address      ----> Based on your Default Gateway Address.
your Default Gateway ----> IP address to access your router obtained from your manual or from the Web Address that follows.

your DNS Address     ---->  the DNS server from your ISP
http://www.dnsstuff.com/tools/aboutyou.ch       this will give youYour DNS Server Address

http://www.portforward.com
then link routers
pick your router
pick your Bittorent client.

You can also find some of this info here.

Click Start then run Type Cmd then click ok
at the prompt Documents and Settings/user>
Type ipconfig /all

Windows IP Configuration      
Host Name . . . . . . . . . . . . : PC1234        
Primary Dns Suffix  . . . . . . . :        
Node Type . . . . . . . . . . . . : Hybrid        
IP Routing Enabled. . . . . . . . : No        
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected        
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller        
Physical Address. . . . . . . . . : 00-CD-14-4E-5C-E1

Ethernet adapter Wireless Network Connection:  
Connection-specific DNS Suffix  . :        
Description . . . . . . . . . . . : PRISM 802.11g Wireless Adapter (3890)        
Physical Address. . . . . . . . . : 00-CD-D3-98-10-87    
Dhcp Enabled. . . . . . . . . . . : Yes        
Autoconfiguration Enabled . . . . : Yes        
IP Address. . . . . . . . . . . . . . . : 192.168.2.2              ----> IP based on Routers Address.        
Subnet Mask . . . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . . : 192.168.2.1              ----> Web configuration Address of router        
DHCP Server . . . . . . . . . . . . . : 192.168.2.1              ----> Assign IP's Automatically from Router        
DNS Servers . . . . . . . . . . . . . : 194.168.8.100            ----> Your ISP's DNS  NTL  in this case
                                                 194.168.4.100
Lease Obtained. . . . . . . . . . : 04 March 2006 21:10:12   ----> how long IP would  Remain if Dynamic.  
Lease Expires . . . . . . . . . . : 05 March 2006 21:10:12

Altough this says there is (DHCP=Dynamic Host configuration Protocol) Dynamic ip availiable this has a static IP.

So i now Have the Info I need.

Now to set up static ip address

Click       start
Click       network  connections
rightclick  local area connection
goto        properties
click       on internet protocol tcp/ip
click       properties
Select      use following ip address

IP Address. . . . . . . . . . . . : 192.168.2.2          ----> Any number from 2 to 254 can be used
Subnet Mask . . . . . . . . . . .: 255.255.255.0        
Default Gateway . . . . . . .  : 192.168.2.1          ----> Web configuration Address of router        
DHCP Server . . . . . . . . . . : 192.168.2.1                      
DNS Servers . . . . . . . . . . : 194.168.8.100            
                                          194.168.4.100

NoW to set up the Ports. LIBITINA allow 30000-65535

open ìTorrent.
Click Options
Click preferences
Click network options
Port used for incoming connections 49500

untick UPNP to disable

now open internet explorer
in address bar type 192.168.2.1

In the box that opens.
password:     ---> this Router by default has no password
click submit

Now to setup Port Forwarding

Left hand Panel Beneath Firewall
click Virtual servers
Games and application sharing
create new game or or application
manual entry of ports

Lan ip                     trigger protocol     Lan port         Public Port

192.168.2.2          UDP&TCP              49500            49500              tick enable


If you Have Service Pack 2 (XP SP2) you will need to set up an exception.

Click Start
Click Control Panel
Click Switch to classic view
Click Windows Firewall
UnTick Dont allow exceptions
click Exceptions Tab
Click add port
fill in required data
click ok

reboot pc and router

you should now find yourself connectable once there is data for the tracker to see.
if no data you will see Connectable: Waiting

Voi incerca sa fac o traducere in cateva zile. Pana atunci va ajutati de asta

FORUMS_REPORT_POST FORUMS_GOTO_TOP_PAGE
0 0  

<< Prev  1   Next >>

Locked
FORUMS_TOPIC_LOCKED

Online Since 10.09.2011 - 2024 | GitHub: Jackett | GitHub: Web Extensions PT | XTR: TVForums | x: XTR Media | OKRU: Media | XTR: Android APP | Donate: BTC ETH CRYPTO
Ora:(
  • :
  • :
)